PERFILERIA
Extruidos in aluminum alloy 6060 UNI 9006/1
Temple of T5 furnace
Tolerance in dimensions and thicknesses according to norm UNI 3879

WOOD
Wood molding of TULIPER, minimum humidity degree 10- 12%
Had with noble wood plate (it rivets, walnut, etc.) glued with tails of polyurethane with guarantees of resistance to the water and the heat.
It is provided in lengths of 6.500.

CHARACTERISTIC TECHNIQUES
Dimensions of the frame: 88 mm
Dimensions of the leaf: 52 mm
Overlap of leaf on the track: 11 mm
Maximum hollow of acristalamiento: 30 mm
Isolation between the wood and aluminum.
Possibility of putting cremona in the lateral closing of the leaf.
Normal track (Maxima resistance of 70 kg.) and track adapted for plastic cleaning rod of sliding (Maxima resistance of 140 kg.) being able to be replaced without disassembling according to European norms.

ASSEMBLY
With the system Wood Slide the accomplishment of tracks of 2 is possible, 3 and 4 leaves. Also the accomplishment of assemblies composed is possible with fixed or practicable of the system Wood Practicable  

OBSERVATIONS
The accessories and trimmings must be the original ones elaborated for this system respecting the indications of I catalogue, are due to respect drainages for the exit of waters within the framework (stamped out) as well as hollows of ventilation in the perimeter of the leaf (drills of 5 mm).

CALCULATIONS OF RESISTANCE OF THE PROFILE
In the calculation of the resistance or moment of inertia of a profile they carry out with the following one formulates:
J=0.0186 xs q x b x  h3

it b=base of assembly in meters
h=altura of the assembly in meters
q=carga of wind (in Kilos by m2) (value from 60 to 100)
J=momento of inertia (cm4)