TECHNICAL DETAILS
The manufacture and installation
of a closing in WOOD this composing of perfilería extruida with
alloy aluminum 6060 (UNI 9006/1), with weather T6 (TA 16) and
tolerances in dimensions and thicknesses according to norms UNI
3569. The moldings are made in wood of tulipier had with plate of
noble wood (rivets, walnut, etc.).
The fixed frame has a total depth of 56.5 mm. the movable leaf has a
depth of 81.5 mm, with the height of the tubular camera of 18 mm in
the version leaf window and 38 mm in the version leaf reinforced
with the purpose of to obtain a proportional resistance to the
necessity of the installation.
The system of hermetic
closing it will be of meeting opened with rubbers of central meeting
made in DUTRAL provided with a fin of direct support on the inclined
plane of closing that for this aim it has adapted the leaf profile.
In the inferior crossbeam of frame one will be due to carry out
perforations for the exit of waters. unions of the profiles and
rubbers of central meeting in the angles they would have to be
sealed to each other to avoid the possible filtrations of water and
air. Between the wall of the work and the frame, it goes installed a
rubber insulator in angle.
The wood moldings go
together with the aluminum structure by means of revolving plastic
pieces, in the cuts conducted in the molding he is advisable to
apply a sellante suitable raincoat.
As much in the frame
profiles like in those of leaf whenever they have on if installed
crystals ventilation drills must practice simultaneously that it
empties. accessories and trimmings will have to be those that the
series stops consider original. The hard anodizings must have a
minimum of 15 microns (UNI 4522-66) and the lacados ones must be of
polyester dust painting termoendurecido and cured in furnace.
|
